J3000

Features

• 7 Stop Collective Selective and 7 Stop Down Collective
• Extendable up to 34 Stops Collective Selective
• 110V Final and landing safety directly integrated within the card
• Relays for drive commands are integrated within main card
• 3 inspection modes, individual ones for car and panel.
• 3 Inspection speed mode
• 3 UPS speed mode
• Operation: Can operate for both Auto-Door and Manual Door
• Speed up to 2m/s
• Comes with two supply system for minimum breakdown
• Has inclusive voice announcer in the junction box.
• All system parameter can be set using 3 buttons and LCD display
• Call register LED and Call Push button are on single wire
• On board LCD display
• All inputs are Opto-Isolated and available in 24VDC
• All input and Output are carrying LED on the main and the auxiliary Cards
• All error are displayed on the LCD
• Each floor can be named by an Alpha Numeric Character (L,P,E,F,H,b,A,o,0,1,2,3,-)
• All inputs and outputs are short circuit protected. In case of short circuit the card goes in-operational
• It also detects landing door safety bypass.
• Only 12 cables are used for system to work using serial connection with the card present in the junction box which reduces labor and cable cost and increases the speed of work.
• PCBs are soldered robotically which gives no room for human error
• LCD display on board helps in programming the parameter and display the error easily.
• All pins are programmable each pin can be used both as input and output
• The card has feature for diagnosis using which we can detect any error in the card or field wiring.
• Final Terminal Switch and Landing Door Safety Operate in 110VAC in order to avoid voltage drop or breakdown.
• The control panel comes with its Serial junction cum inspection box
• Both ARD and UPS inclusive models are available.